QR Gold |
QR Gold Mount includes hardware for mounting to virtually any portable equipment that can be powered from 12-14 volts DC. Powering an entire video operation from a single type of battery/charger system is the ultimate in convenience and economy. |
QRC Gold |
Compact version of the universal Gold Mount, approximately 3/4" smaller, making it ideal for installation in tight spaces. Size: 0.50 x 4.70 x 3.00 in (1.27 x 11.94 x 7.62 cm) |
QR DSR |
Instantly converts the Sony "wedge" or "V mount" connector to a Gold Mount system. The QR DSR allows unrestricted use of on-camera lighting, as well as InterActive viewfinder Fuel Gauge and Automatique features for the Sony camcorders. |
QR SDH |
Instantly converts the Sony "wedge" or "V mount" connector to a Gold Mount system. The QR SDH allows unrestricted use of on-camera lighting, as well as InterActive viewfinder Fuel Gauge and Automatique features for the Sony camcorders. |
QR Hotswap |
Mounts directly to the camera for true, continuous battery operation. Unlike "stacking" batteries one behind the other, electronics in the QR HOTWSWAP allow either battery to be changed at anytime. The circuitry automatically combines the output of both digital battery fuel gauges for accurate display in cameras incorporating InterActive viewfinder features. Can be used with Dionic 90 or Hytron 50 batteries only.
Weight: 0.8 lbs (0.4 kg) |
UNIPAC |
The UNIPAC features a Gold Mount with 5 foot long 4 pin XLR cable and rugged belt with intergrated loops. Allows a Gold Mount battery to power virtually any piece of portable 12-14 volt equipment via the built in 4 pin XLR cable. |
QR UNIV |
The QR UNIV features an integrated 20" cable with 4 pin XLR connector. Ideal for powering any portable video equipment. |
SO 30/13 |
Change from 30 volt to 13 volt mode at the flick of a switch. In the 13 volt mode the batteries are in parallel providing extended run times for any 12 volt portable device. Switch to 30 volt mode and the two batteries are in series to deliver high voltage power for 30 volt applications. Accepts any two Gold Mount batteries of the same voltage. 100 watt maximum output. |
NP/BP Adapter |
Allows an NP or BP-90 style battery box to mount on equipment fitted with a Gold Mount. NP/BP box not included. |
SO XLR Adapter |
Allows any Gold Mount to accept a standard 4 pin XLR connector. |
QR EX1 |
Under the camera Gold Mount for the Sony PMW-EX1, features built in EgripZ. |
QBH HD |
Using any Gold Mount Batteries the QBH HD will output both 14.4 and 28.8 volts simultaneously bridging the power gap between HD video cameras and film accessories. |
QR EX3 |
Gold Mount adapter for the Sony PMW-EX3 camera. Comes standard with a Powertap connector for powering an on-camera light, wireless receiver or any other 12 volts accessories. Note: The QR-EX1 and QR-EX3 Gold Mounts can ONLY be used with Dionic 90 or Hytron 50 batteries. |
PT EXT |
7 foot PowerTap male to PowerTap female cable. Allows the extension of any PowerTap equipped device from the Gold Mount. |
PT CL |
PowerTap male connector to universal female cigarette lighter connector. Plug into the PowerTap on any Gold Mount and power any device such as a cell phone or CD player using the device's automobile adapter cable. |
PT Electro |
An 8 inch long PowerTap cable to fit any Lectrosonics wireless receiver. |
PT Multi |
Male PowerTap to 4 female PowerTap receptacles. Expands any Gold Mount PowerTap to acommcodate up to four seperate devices. Perfect for powering multiple wireless receivers as well as an Ultralight from a single camera battery. 10 amp max. |
QR-A200 |
Adapts the "wedge" or "V mount" on Sony DNWA225/DNWA220/DNWA25/DSR70 portable SX editing machine to a Gold Mount. Can also be used to power the Sony DSR 50 VTR and BVMD9 high definition monitor. |
PT Open End |
A 3 foot power cable that mates with the PowerTap receptacle in any Gold Mount. Can be used to power any 12-14 volt accessory from the camera battery. 10 amp max. |
PT-FS4 |
14 inch PowerTap cable. Plugs into the QR JVC 7/14 HDV bracket to provide power to the the DR-HD100 hard disk drive. |
PT 36 |
36 inch long cable for connecting any piece of equipment with a 4 pin XLR to the PowerTap receptacle. |
QR SVM |
Gold Mount for the Sony BVM-D9 Hi-Definition monitor and PVM-8041Q/8044Q/9041Q/8045Q/8042Q/8040 monitors. |
UP Monitor |
For the Sony BVM-8020/8021 monitors and all other portable equipment with a BP-90 type power input connector. This is a portable adapter with an intergrated power cable and does not permanently mount to the equipment. |
QR 7LCD |
Gold Mount for the Panasonic TLC-7WMSI monitor. LCD monitor attaches via the 5/8" female thread at the bottom. Includes breakout connections for audio input from camera. |
QR XLH |
Adapter for the Canon XL-h1,XL-1,XL-2. The XL1/2 requires the MA-100 shoulder pad accessory for mounting. |
QR DVC10 |
Adapter for the Panasonic AG-DVC10, AG-DVC15 and AG-DVC7/60 Mini DV camera/recorder. |
QR DVX |
Pouch style 7/14 adapter for the Panasonic AG-DVX 100/100A/100B/AG-DVC30, AG-HVX-200 and AG-HPG1- portable recorder. |
QR PDHDV |
Pouch style 7/14 adapter for the Sony DSR PD170/150/100, HDV-FX1,HVR-Z1U and DCR-VX2000/2100 camcorder. |
QR JVC 7-14HDV |
Adapter for the JVC GY-HD1--/GY-HD110 |
QR-P2 |
Gold Mount adapter for the Panasonic AJ-HPM 100 portable recorder. |
QR DVCPRO LPT |
Gold Mount adapter exclusively designed for the Panasonic AJ-LT 75/95 and AJ-HPM 100 DVCPRO portable field editor. Allows two Gold Mount batteries (Hytron 100/140 or ProPac 14 recommended) to power the editor continuously for up to 1 1/2 hours. |
QR QUAD PT |
Gold Mount Bracket featuring 4 PowerTap receptacles for powering multiple accessories. Features built in fuse. |
QRP EX1 |
Pouch style adapter for Sony PMW-EX1. |
For Current Pricing and Availability:
CALL 800-323-8148
or EMAIL:
This e-mail address is being protected from spam bots, you need JavaScript enabled to view it