Anton/Bauer:The worldwide standard ®

TWQ The TWQ is a four position simultaneous InterActive charger which delivers the ability to charge FOUR batteries at the same time, conveying the full complement of batteries up to 4 times faster than some sequencing type chargers. Focusing the full capability of the efficiency of the T series power architecture on battery charging, the TWQ uses all the charge termination techniques of the field proven InterActive system to service any of the Anton/Bauer Gold Mount batteries quickly, reliably, and safely. Simultaneous charging means that all batteries on the charger will be completed at the same time,(e.g. four ProPac batteries will be charged in 3 1/2 hours) versus sequencing the batteries one at a time. This is the perfect charger for the operation which needs to cycle batteries often during the shooting day. Like all InterActive chargers, TWQ will address all Anton/Bauer batteries of any chemistry.  90-250 VAC wide range input. Size: 11.5” x 8” x 3” (29.2cm x 20.3cm x 7.6cm) Weight: 3.5 lbs. (1.63kg)

The T2 combines two channel independent simultaneous InterActive charging with a 70 watt DC output for camera operation. The T2 is capable of simultaneously operating the most power-hungry camera while charging up a spare battery in the fastest charge time possible. InterActive charge programming provides all charge termination and protection routines for safe, reliable, chemistry independent charging. T2 automatically identifies battery type and chemistry adjusting the charge process for each battery. T2 will address all Anton/Bauer Gold Mount batteries including HyTRON and Dionic. T2’s simultaneous charging reduces the time to obtain two fully charged batteries versus sequential charging (see chart on page 8), charging two batteries in the time it takes a sequencing charger to address one battery. T2 meets all applicable standards including CE and FCC requirements.
T2 simultaneous two position InterActive charger with 70 watt camera output.
90-250VAC 50/60 Hz wide range input. 10 amp output fuse (internal resetting).
Size: 8” x 9.25” x 3.25” (20.3cm x 23.5cm x 8.25cm) Weight: 2.85 lbs.(1.30 kg)
MAXX I Warranty
 
OPTIONAL ACCESSORY
XLR-4 Camera Power Accessory Cable 10 ft / 3.04m cable connects to any PowerCharger or T2 model to power camera / camcorder through standard camera 4-pin XLR input. Heavy duty wire gauge cable and high quality connectors minimize losses.
 

TWIN
TWIN Two position, 60-watt simultaneous InterActive® battery charger
The sleek design of the TANDEM has been applied to the TWIN charger making it the lightest and smallest charger Anton/Bauer has ever produced. Its high impact plastic enclosure will stand up to the most rugged use. Its universal wide range mains input (90-250 VAC 50/60Hz) makes it the ideal travel charger.
TWIN features the same exclusive state-of–the-art charge termination techniques of Anton/Bauer InterActive® chargers with the added advantage of charging two batteries at the same time! TWIN will charge two TrimPacs in 2 hours or HyTRON 50s in 3 hours, two ProPacs in 3 1/2 hours, or two Dionic 90's in 5 1/2 hours. The exclusive Anton/Bauer Lifesaver® maintenance routine keeps all batteries fully charged until ready for use.

The TWIN is chemistry independent and capable of upgrade with a simple chip replacement as new battery technologies are introduced. Batteries are automatically identified by the charger and addressed with a charge routine specifically designed for that battery to reliably and safely optimize battery performance and service life.  
TWIN Two position, 30-watt simultaneous InterActive® battery charger.
90-250 VAC, 50/60 Hz.
Size: 5.7” x 5” x 2.3” (14.5cm x 12.7cm x 5.8 cm) Weight: 480 g (16.8 oz).
TWIN meets all applicable standards including CE and FCC requirements.
 

TITAN 70 Gold Mount 70 watt charger / power supply.
A new approach to portable power, TITAN combines all the functionality of a one position InterActive® charger with the convenience of a noise free camera mounted wide range AC mains adapter. TITAN will power even the most power hungry high definition camera from any worldwide AC source. It also doubles as a full function InterActive Charger charging any Anton/Bauer Gold Mount battery in two hours or less. Weighing only one pound (.450 grams) the TITAN 70 is the perfect addition to any field camera and a lightweight mains adapter and a high performance charger. Meets all applicable regulatory requirements including CE and FCC. 
TITAN 70 Gold Mount 70 watt charger / power supply.
90-250VAC 50/60 Hz wide range input. Output power in adaptor mode: 70 watts max., 10 amp output fuse
Size: 5-1/4" x 4" x 2-1/8" (13.2cm x 10.3cm x 5.6cm) Weight: 1lb (.450 grams)

Charger/Battery Packages
AB DIONIC Package: Consists of (1) DIONIC and (1) Tandem 70
ABP-900A: Consists of (2) DIONIC 90's and (1) TWIN Charger

For Current Pricing and Availability:
CALL 800-323-8148
or EMAIL:
This e-mail address is being protected from spam bots, you need JavaScript enabled to view it