Affordable HDCAM studio editing recorder. Capable of Recording and playback HDCAM 1080/59.94i, 50i, 25PsF, 29.97PsF, 23.98PsF and 24PsF formats. 3-2 pull down is available by using option board HKDW-104. This deck inherited all editing functions from HDW-2000 series, such as DMC, audio split, pre-read and audio cross-fade editing. A color LCD panel on the control panel displays various type of information including audio level meter and time data. The LCD unit also displays video when playback or recording. Built-in down converter enables to output 480/59.94i or 576/50i. Up to 3 packets of VANC metadata can be recorded and played back. Non-audio recording is available such as Dolby-E or AC3. By using HKDW-104 option board, 720/50P or 720/59.94P output is available. The HKDW-105 i.LINK (HDV) input option board can be installed to record the i.LINK (HDV) signals from HDV devices onto HDCAM tapes.

HDCAM recording and playback - 1080/59.94i, 50i, 25PsF, 29.97PsF, 23.98PsF and 24PsF
Built-in down converter enables to output 480/59.94i or 576/50i from HD
Simple control panel with color LCD panel which can display audio level meter, time data and playback/recording picture
DMC, Pre-read, audio split and audio cross-fade editing
Up to 3 packets of VANC metadata recording and playback
Non-audio data such as Dolby-E or AC3 can be recorded
RS-422 connector is equipped for Sony 9pin remote control
Option HKDW-104 enables 3-2 pull down output or 720P conversion output
Option HKDW-105 enables to record HDV input via i.LINK onto HDCAM tape
Video remote controller HKDV-900 can be connected
Remote editing controller RM-280 can be connected

HDCAM format:  The HDCAM format uses the same 12.65-mm width tape as the conventional Betacam series. It provides high definition images, offering up to two hours of recording. High-quality 20bit/48kHz digital audio is supported in HDCAM format and there are four digital audio input/output channels.
Control panel with LCD display:  The control panel contains an LCD display unit to display various types of information including time data. The display mode can be changed to show the video which is currently recorded or played back.
Function menu:  You can use the function buttons on the LCD display and the MULTI CONTROL knob to easily carry out many of the operations and make many of settings supported by the unit. The current settings can be checked on the LCD display.
DMC editing: This allows automatic editing with a varying playback speed memorized beforehand for an edit segment.
Pre-read editing:  This allow you to playback pre-recorded video and audio material, edit it by applying effects with an external device, and then recorded in real time on the same tape.
Cross-fade editing:  In audio editing, you can fade the audio track. You can select cut-in, fade-in, fade-out or cross-fade.
Built-in down converter:  This unit has HD to SD down converter function and can output SD SDI and analog composite signals as well as HD SDI.
Remote control function:  This unit can be controlled from an external remote controller or editor through an interface complying with RS-422A (Sony 9pin). Additionally a parallel (50pin) interface is also fitted as standard, supporting easy external control through the parallel interface.
3-2 pull down playback and 720P output function (optional): The HKDW-104 option board can be installed in this unit to carry out 3-2 pull down playback and 720P output.

Digital Video Performance
Quantization: 10 bit/sample (compression: 8 bit/sample)
Sampling Frequency: Y: 74.25 MHz
                                    R-Y/B-Y: 37.125 MHz
Error Correction:  Reed-Solomon code
Compression:  Coefficient recording system
Channel Coding:  S-I-NRZI PR-IV

Digital Audio Performance
Quantization: 20 bits/sample
Headroom: 20 dB (18 dB selectable)
Sampling Frequency: 48 kHz (synchronized with video)
Wow & flutter: Below measurable level

ANALOG AUDIO PERFORMANCE
Frequency Response: 20 Hz to 20 kHz
                                      +0.5 dB/-1.0 dB (0 dB at 1 kHz)
Dynamic Range:  More than 95 dB
                             (at 1 kHz emphasis ON)
Distortion:  Less than 0.05%
                  (at 1 kHz emphasis ON reference level)
Crosstalk:  Less than -80 dB
                   (at 1 kHz between any two channels)
D/A Quantization:  20 bit/sample
A/D Quantization:  20 bit/sample

Input/Output
Remote Control:  D-sub 9-pin
                                RS-232C interface
Analog Audio Input:  (CH1/2/3/4/CUE)
                                  XLR-3-pin type (female) x 5
                                  Low off: -60 dBu high impedance balanced
                                  High off: +4 dBu high impedance balanced
                                  High on: -4 dBm 600 Ω termination balanced
Analog Audio Output:  (CH1/2/3/4/CUE)
                                     XLR-3-pin type (male) x 5
                                     +4 dBm (600 Ω load)
                                     Low impedance
                                     Balanced
Analog Composite Output:  BNC x 3 (RS-170A including one character out and one WFM out)
                                            Y: 1.0 Vp-p 75 Ω Sync Negative
HD-SDI Output BNC x 3 (SMPTE 292M including one character out)
Serial Digital (1.485 Gb/s)
Headphone Output : JM-60 Stereo phone jack
                                  (-∞ to -12 dBu at 8 Ω load unbalanced)
Time Code Input:  XLR-3-pin type (female) x 1
                             0.5 to 18 Vp-p
                             10 kΩ
                              Balanced
                              XLR-3-pin type (female) x 1
                              0.5 to 18 Vp-p
                              10 kΩ
                                  Balanced)
Time Code Output : XLR-3-pin type (male) x 1
                                2.2 Vp-p
                                Low impedance
                                Balanced
Video Control:  D-sub 9-pin
HD-SDI Input:  BNC x 1 (SMPTE 292M)
                           Serial Digital (1.485 Gb/s)
HD/SD Reference Video Input 1:  BNC x 2 (with a loop-through)
                                                            Tri-level sync
                                                            0.6 Vp-p 75Ω Sync Negative
HD/SD Reference Video Input 2:  BNC x 2 (with a loop-through)
                                                            Tri-level sync
                                                             0.6 Vp-p 75Ω Sync Negative
Digital Audio Input : (CH1/2 3/4)
                                    BNC x 2
                                    AES/EBU
Digital Audio Output:  (CH1/2 3/4)
                                   BNC x 4
                                   AES/EBU
SDI Output BNC x 3 (SMPTE 259M including one character out)
Serial Digital:  (270 Mb/s)
Remote 1 Input:  D-sub 9-pin (x2)
                           Sony 9-pin remote interface
Remote 1 Input/Output:  D-sub 9-pin (x2)
                                            Sony 9-pin remote interface
Analog Audio Monitor Output:  XLR-3-pin type (male) x 2
                                                 +4 dBm at 600 Ω load
                                                  Low Impedance
                                                  Balanced)
Control Panel : D-sub 15-pin
Parallel Remote:  D-sub 50-pin (x1)

General
Weight:  48 lb 8 oz (22 kg)
Power Requirements:  100 to 240 V
                                      50/60 Hz
Dimensions:  (W x H x D) 16 7/8 x 6 7/8 x 21 1/2 inches
                                        (427 x 174 x 544 mm)
Power Consumption:  150 W
Fast Forward/Rewind Time:  Approx. 3 min with BCT-D124L cassette
Servo Lock Time:  0.6 s or less (59.94i and 29.97PsF from standby on)
                              0.7 s or less (50i 25PsF 24PsF 23.98PsF from standby on)
124 min (w/ BCT124HDL Caas):  59.94i
                                                     29.97PsF
149 min (w/ BCT124HDL Cass):  50i
                                                     25PsF
50 min (w/ BCT40HD Cass):  24PsF
                                               23.98PsF
48 min (w/ BCT40HD Cass):  50i
                                               25PsF
40 min (w/ BCT40HD Cass):  59.94i
                                               29.97PsF
Format:  HDCAM
Operating Temperature:  41 to 104 °F (+5 to +40 °C)
Storage Temperature:  -4 to +140 °F (-20 to +60 °C)
Operating Humidity:  25 to 90%
Load/Unload Time:  6 s or less (both L and S cassettes)
Applications:  Studio Recorder/Player
Tape Format:  HDCAM

General - Search Speed Range Shuttle Mod
HDCAM:  Still to ±50 times normal speed playback (59.94i and 29.97PsF)
               Still to ±58 times normal speed playback (50i and 25PsF)
               Still to ±60 times normal speed playback (24PsF and 23.98PsF)

General - Tape Speed
HDCAM:  96.7 mm/s (59.94i and 29.97PsF)
               80.6 mm/s (50i and 25PsF)
               77.4 mm/s (24PsF and 23.98PsF)

General - Search Speed Range Variable Mo
HDCAM: -1 to +2 times normal speed playback
JOG Mode: Still to ±1 times normal speed playback

ANALOG COMPOSITE OUT PERFORMANCE
Bandwidth:  Y: 0 to 5.75 MHz +0.5 dB/-2.0 dB
                     R-Y/B-Y: 0 to 2.75 MHz +0.5 dB/-2.0 dB
S/N Ratio:  53 dB or more
Differential Phase:  2% or less
Differential Gain:  2% or less
Y/C Delay:  20 ns or less
K factor (2T pulse):  1% or less
Output SCH Phase:  Based upon RS-170A/CCIR R.624-3

Supplied Accessories
PSW 4x16 Rack mount screw (x4)  
Operation manual (x1)   
Installation manual (x1)   
Operation Guide 

OPTIONAL ACCESSORIES
RM280 Remote Edit Controller
RCC5G/US RS-422 Cable

For Current Pricing and Availability:
CALL 800-323-8148
or EMAIL:
This e-mail address is being protected from spam bots, you need JavaScript enabled to view it