The MV-410HS is a 4-channel multi viewer that supports mixed input of HD-SDI, SD-SDI and analog composite signals. High-resolution video output using a DVI terminal is included as standard. Support is also provided for user-created patterns and video transfer over a LAN connection.

Support for mixed input of HD-SDI, SD-SDI, and analog composite signals (asynchronous input is possible)
Support for mixed input of different frame rate signals
High-resolution output: DVI and analog RGB terminals are provided as standard for split-screen video output for enabling easy usage on large screens and computer monitors.
Includes layout software for enabling the user to make any changes to split-screen patterns from a computer.
Network video transfer function: LAN interface provided as standard for enabling transfer of output video over the network
Audio level display: Includes level display function for embedded audio signals superimposed on HD/SD-SDI (8ch display)
Includes tally display, title display, and time display functions
Video loss detection function
In addition to the standard functions, other additional functions are also available for installation as options
- HD/SD-SDI output: Enables installation of HD/SD-SDI output for use in simple monitoring
- SNMP support: Enables external monitoring of the power supply and fan alarm status
- Enables installation of redundant power supply

Specifications
 Standard  HD: 1080/59.94i, 1080/50i, 720/59.94p*, 720/50p* (*Future support is planned)
SD: 525/60 (NTSC), 625/50 (PAL)

Video Input 4 inputs from any of the signals below (mixed input and asynchronous input are possible)
HD-SDI: 1.485Gbps or 1.485/1.001Gbps, 75Ω, BNC
SD-SDI: 270 Mbps, 75Ω, BNC
Analog composite: 1.0 Vp-p, 75Ω, BNC

Video Output One of the outputs below is used.
DVI output: DVI-I connector, 1 output
Resolution: 1920 x 1200, 1600 x 1200, 1280 x 1024
Analog RGB output: DVI-I connector, 1 output
Resolution: 1920 x 1200, 1600 x 1200, 1280 x 1024

I/O Delay 1.5 to 2.5 frames

Split-screen Patterns Full screen, 4 split-screen, user-selected screen
Character Display Display characters: Maximum of 16 characters x 1 line per input channel
Character types: Alphanumeric, Japanese kana, symbols

Tally Display Displayed in each input screen frame (red or green)

Audio Level Display Displayed in each input screen frame, 8 channels of embedded audio signals

Time Display Enables display of the current time (internal clock)
 
Interfaces RS-232C/RS-422: D-sub 9-pin (male), 1 line\
Transmission rate: 9600 bps, data length: 8 bits, stop bit: 1 bit, parity: none
TALLY IN: D-sub 25-pin (female) *Shared with REMOTE IN
4 inputs x 2 colors (red or green color frame display)
TTL negative logic level signal or make-contact input
 REMOTE IN: D-sub 25-pin (female) *Shared with TALLY IN
Switching between full screen and split-screen display
TTL negative logic level signal or make-contact input
 LAN: 10Base-T/100Base-TX, RJ-45 (CAT5 support), 1 line
Video transfer: DVI/analog RGB output and transfer of the same screen with size reduction, JPEG compression
 
Layout Software Setting of the split-screen video size and split-screen video position

Temperature/Humidity 0ºC - 40ºC / 30% - 90% (no condensation)

Power 100VAC - 240VAC ±10%, 50Hz/60Hz

Dimensions 430 (W) x 44 (H) x 370 (D) mm EIA 1RU
 
Accessories Operation manual, AC cord, Rack mount brackets, Layout Software

Option HD/SD-SDI output (DVI/analog RGB output (60Hz) is converted and output for simple monitoring applications)
SNMP support (Monitoring of power supply and alarm status)
Redundant power supply
 
Please note that the technical details shown here are provisional specifications (as of February 2007). This information is subject to change without notice.

For Current Pricing and Availability:
CALL 800-323-8148
or EMAIL:
This e-mail address is being protected from spam bots, you need JavaScript enabled to view it