Microflex Standard Gooseneck microphones bring a whole new meaning to the word flexible with their fully adjustable gooseneck. Designed for easy replacement and available in cardioid, supercardioid and omnidirectional polar patterns, the interchangeable cartridges offer wide frequency response and accurate sound reproduction for a wide variety of applications, such as houses of worship, courtrooms and conference centers. Plus, the condenser cartridges fit every model in the Microflex product line for enhanced convenience and consistent sound.
Microflex Gooseneck microphones are available in four models with a variety of heights and mounting styles to choose from. One model includes a silent mute switch with LED indicator, a Shure Microflex exclusive. And every Microflex Gooseneck features high sensitivity and balanced, transformerless output for maximum resistance to electromagnetic hum and RF interference, even over long cable runs. The polar pattern of the cartridge is indicated by the model number suffix: C = Cardioid, S = Supercardioid, N = No Cartridge
Desktop Base with 10 foot Cable, Logic Functions, Programmable Switch and LED Indicator, Snap-Fit Foam Windscreen
MX418D/C
MX418D/S
MX418D/D
457.2 mm (18 in.) gooseneck
Desktop Base with 10 foot Cable, Logic Functions, Programmable Switch and LED Indicator, Snap-Fit Foam Windscreen
Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges provide the right polar pattern for every application
Balanced, transformerless output for increased immunity to noise over long cable runs
Shock mount provides over 20 dB isolation from surface vibration noise
Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables
Snap-fit foam windscreen
Programmable on/off switch and LED on/off indicator (MX412D/MX418D)
New brighter LED improves visibility under strong ambient lighting (MX412D/MX418D)
Logic input and output terminals for remote control or use with automatic microphone mixers (MX412D/MX418D)
Supplied shock mount for more than 20 dB isolation from surface transmitted noise (MX412SE/MX418SE)
Supplied threaded flange mount for permanently securing the microphone to a lectern, pulpit, or conference table (MX412SE/MX418SE)
Microphone Specifications:
Frequency Response
50 to 17,000 Hz
Output Impedance 180 ohms actual (EIA rated at 150 ohms) Sensitivity (At 1,000 Hz, open circuit voltage*) Cardioid: -35.0 dBV/Pa (17.8 mV) Supercardioid: -33.5 dBV/Pa (21.1 mV) Omnidirectional: -27.5 dBV/Pa (42.2 mV) All values -12 dB at 0 gain; *1 Pascal = 94 dB SPL Maximum SPL (1 kHz at 1% THD, 1 k ohm load) Cardioid: 124.2 dB Supercardioid: 122.7 dB Omnidirectional: 116.7 dB All values +6 dB at 0 gain Equivalent Output Noise (A-weighted) Cardioid: 28.0 dB SPL Supercardioid: 26.5 dB SPL Omnidirectional: 20.5 dB SPL Signal to Noise Ratio (referenced at 94 dB SPL) Cardioid: 66.0 dB Supercardioid: 67.5 dB Omnidirectional: 73.5 dB Dynamic Range at 1 k ohm load 96.2 dB 100 dB at 0 gain Common Mode Rejection 45.0 dB minimum Preamplifier Output Clipping Level (1% THD) -6.0 dBV (0.5 V) -12 dBV at 0 gain Polarity Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector. Power Requirements 11 to 52 Vdc phantom, 2.0 mA Environmental Requirements Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F) Relative Humidity: 0 to 95%
OPTIONAL ACCESSORIES
A99SMA Retrofit Adapter for SM99 Microphone Adapter to Retrofit SM99 Microphone Series with Microflex Mounting Accessories
A99WS Microphone Windscreen Windscreen, High Performance Ball, Foam, for Microflex Gooseneck Microphones.
RK412WS Windscreen for MX412 and MX418 Windscreen, Snap-fit, for MX412 and MX418 Microphones (Contains Four)
A412MWS Locking Metal Windscreen Windscreen, Locking Metal, for Microflex Gooseneck Microphones.
A400SM, A400XLR, A400SMXLR and A99SMA Shock Mounts The A400SM, A400XLR, A400SMXLR and A99SMA are accessories that allow permanent installation of a quick-release shock mount for use with a wide variety of gooseneck microphones.
RK183PK and RK183PKW In-Line Preamplifier In-Line Preamplifier for MX180 Series, MX202B, MX412, MX412SE, and MX391 Microflex Microphones.
A412B Desktop Base Shure A412B microphone base allows gooseneck mics to be quickly mounted when permanent installation is impractical. Angled XLR input connector maintains a low profile. Ample room for custom circuitry. Includes cable.
R183B R183W Omnidirectional Cartridge Omnidirectional cartridge for all Microflex MX183, MX202, MX391, MX392, MX393, MX412, MX418 and WL183 microphones. White or Black
R184B and R184W Supercardioid Cartridges Supercardioid cartridge for WL183, WL184, WL185 and all Microflex MX183, MX202, MX391, MX392, MX393, MX412, MX418 Microphones. White or Black
R185B and R185W Cardioid Cartridges Cardioid cartridge for all Microflex MX183, MX202, MX391, MX392, MX393, MX412, MX418 microphones. White or Black
For Current Pricing and Availability: CALL 800-323-8148 or EMAIL: