Anton/Bauer:The worldwide standard ®

The innovative ElipZ 10k brings unmatched power density to handheld 7.2 volt battery operated cameras. Using the highest capacity lithium ion cells available, the 75Wh 10k can provide runtimes as much as 2 to 5 times that of the consumer OEM batteries supplied with the cameras. On a 10 watt camera load, the 10k will run over 7 1/2 hours, virtually a full shooting day! State indicator LEDs give a simple and easy to understand and constant indication that the battery has usable capacity (Blue) or requires charge (yellow).

Constructed of high impact polycarbonate the ELIPZ 10K innovative under-camera mounting design allows batteries to be easily mounted and released with one hand. A quick release "shoe" attaches to the camera and the battery attaches directly and securely to the shoe. Lowering the center of gravity of the camera and providing an additional handhold without interfering with the camera operation, the lightweight ElipZ battery actually improves the comfort and handling characteristics of the camera. The appropriate adapter cable connects directly to the camera battery compartment and plugs into the PowerPlug connector on the ElipZ 10K. The ElipZ 10K mounts easily to the EgripZ support, or other camera support using the metal 1/4 20 insert at the bottom of the battery. The unique ElipZ power connector accepts both the camera adapter plug and the ElightZ PowerPlug. The 10k is capable at continuous loads of up to 6 amps - more than enough for a camera and light simultaneously.

ELIPZ 10K BATTERY
75Wh lithium ion battery (10,500 mAh @7.2V) - requires one of the following cables for your specific camera type. 6.4" X 3.2" X 1.7" (16.3 X 8.0 X 4.3 cm) 1.25lbs (567grams)

ELIPZ cable adapters:
Model SI-ADP-ELPZ.  ElipZ Adapter for Sony PD-100/150/170, DCRVX2000/2100, HDR-FX1
Model SH-ADP-ELPZ. Elipz Adapter for Sony HVR-V1U, HVR-ZIU
Model CA-ADP-ELPZ. ElipZ Adapter for Canon GL1/2, XM2
Model PA-ADP-ELPZ. ElipZ Adapter for Panasonic AGHVX200, AJDVX100/100A/100B, DVC80/30

The ElipZ battery charger weighs only 14 oz yet has the power to charge the ELIPZ 10K in as little as 6 hours. Simply plug the charger into the PowerPlug connector on the battery and the charger will automatically begin its charge routines. LEDs give easy to understand charge mode indication and features wide range (90-250VAC 50/60 Hz) mains input. Desktop design allows for easy travel and storage.
ELIPZ CHARGER. 5.4" X 3.1" X 2.2" (13.7 x 7.8 x 5.5 cm) .85 lbs. (385 grams)

Operator's Manual

ELIPZ 10K PACKAGE contains (1) ELIPZ 10k battery and (1) ElipZ charger.
NOTE: Requires appropriate ELIPZ Cable Adapter as shown above.

ELIPZ MOUNTING SHOE. Spare ELIPZ mounting shoe

ELIPZLIGHT

For Current Pricing and Availability:
CALL 800-323-8148
or EMAIL: